Thursday, August 20, 2026

Newest addition to the stable...

 Lo and behold...my 2015 Suzuki Vstrom:


Purchased Aug 13, 2026.

This will be my final attempt to enter the "ADV" scene (remember the "Funduro"? probably not since I wiped every last mention of it from this blog...) and expand my horizons.

First impressions are favorable so far...it is a low-mileage offering, although the rear tire shows signs of needing replacement soon...and falls within the span of years that are considered "good" models, as every type and model of M/C has its flaws...(remember the DR650?)

So despite my vows to never own another Suzuki...here we are. All of my research has depicted this model as one of "the most trouble-free motorcycles of all time", so I went ahead and did it.

Preliminary tests have been good; this thing has more power than I should ever need or want. A quick trip on the highway shows that it is capable of achieving highway-speeds within seconds...and I hadn't even shifted into 6th!
As always...time will tell as to whether this was a good investment or not. According to the odometer, it will be due for a valve-check and coolant replacement some time next Spring...we'll see how involved those tasks are.

 

 

 

 

Wednesday, April 15, 2026

Whether the weather will improve...

 Not much to report today...I just received my Stearn's ATV seat-clone and it doesn't look too bad. 
I've stuffed by usual foam cushion underneath like I did with the old '01...and it adds some necessary width to the seat as well as another inch or so of height. Now all I need is some decent weather to try it out. May end up covering the whole thing with a chunk of sheepskin that I have...for that extra layer of comfy!

As far as the setup goes...she seems to start easily enough when cold and the #128 Main seems to be a bit more forgiving if I don't let her warm up "fully"...

Took a buzz out to Harrison last week and aside from being cold (weather-wise)...she performed well.

Weather is supposed to clear up for the rest of the week...with any luck!

Tuesday, April 7, 2026

The long, long ride...

 Watched a YouTube video the other day of another TW owner who lives close by, and his trip to White Rock.
This got me thinking...and on Monday, April 6th...we took the trip.

The route was simple enough...get to Vye road and follow it until it meets with Hwy 11, then two blocks north to 16th avenue and follow that all the way into White Rock. We left at 10:15 and arrived at around 11:45. That's an hour and a half to go 50 miles. 
Coming home was about the same time, although we did make a brief detour/stop at Albert Dyck park near YXX. Total mileage...175 km. One thing is for certain...that seat needs some work!

I had been planning to do some maintenance so later that evening, I prep'd the bike by removing the gas tank and cleaning the area around the valve covers.
Since that didn't take long, I thought I'd take the opportunity to pull the carb and install the new "extended fuel screw" that I was salivating for when I saw it on the ProCycle website.
While in there, I also swapped out the stock #126 main jet for a #128...pilot jet was kept stock.

This didn't take long, so I thought I'd start her up and check out how the new fuel screw performed...what a disappointment! While it is quite "extended"...the timing chain tensioner sits directly in front of it, effectively blocking access to it! 
It is not possible to get the fingers of ONE hand onto the knurled knob...I had to adjust it with both hands. At first I thought I could get past this...but in the end, I pulled it out the next day. At least with the OEM screw, my homemade mini-screwdriver can be used. Sure, it takes 2 hands, but I get a better visual as to what position I am in. 
Could I have made the extended screw work? Probably. But I don't like mods that I have to "make work"...they should just work.







Sunday, March 8, 2026

Nothing much happening....

 
At first, the weather was the biggest issue with getting any riding done but now...it is personal injuries.
I may have mentioned a while back that I'd hurt my back last January while trying to wrestle my TW in the garage...this has been an on-going problem for over a year now and it's something that I don't wish upon anybody...the level of pain I experienced at the onset was horrendous...nerve pain that I've come to know so well is an awful, awful thing.

If that wasn't bad enough...I also over-extended my left arm to the point where it has created a knot in my neck...that has been on-going for over a month now, but it dwarf's in comparison to the pinched nerve I currently have on the right side of the same neck! Every winter seems to be the same thing...laid up for months with a self-induced injury - I'm getting sick of this. Being in pain 24/7 is not how I intended to spend the rest of my days.

Last Thursday (March 05, 2026) I received my first series of spinal injections and at this time I 'd like to say that they've made a difference, although with these other issues I've been having...I'm not jumping for joy yet. Will be seeing my Physio next week and hopefully she can set me straight...again!

Bike news?
Managed to get out for a brief ride a couple of weeks ago...before the "stinger" appeared. 
Still haven't done any major maintenance to either of them, although the CT90 parts arrived and I've been doing piece-meal stuff whenever I get bored.
Bought the parts at Fortnine of all places...should have ordered a couple of spokes to replace the broken one from last year, instead of the Amazon knock-off.

 

Tuesday, January 27, 2026

2025 in a nutshell....

Since I mentioned it in my October post...I thought I might as well make a page for it.
 

So if you want to see a real brief edition of last year's rides...go HERE.

 


Monday, January 26, 2026

Still winter....

 Although we've had some fantastic weather over the past 2 weeks...it is indeed still winter. This was made clear when I tried to take a few rides lately. 
Even though the temperatures have been as high as 12°C in the afternoons, going over 60 kmh reminds you of the effects of wind-chill. Riding anywhere in the shadows of the daytime sun also reminds you that is still just January.

Nonetheless, I have been able to get out a few times...nothing worth noting...no real destinations or goals, just keeping in riding shape! 
My extended fuel-mixture screw arrived last week and I will put it into use when we return from our vacation in February. Am also thinking of replacing the main jet again...we'll see if that pans out.

 



 

Saturday, January 3, 2026

Again...too long between entries!

 Once again I find myself lagging behind, but events in my home life has meant that more time and attention was spent on other factors/family/interests etc.

After the last entry, I awaited patiently for my parts to arrive from Yamaha Canada and when they did, I got right back to work and replaced the float seat and needle. Now, it seems as though my days of leakage are behind me...<touch wood>

Since then, I have winterized BOTH rides but I still go out and start the TW periodically. The other day, I watched a YouTube video from Project Farm where he went over the many different types of fuel stabilizers and additives. This is where I lost all faith in my go-to product: SeaFoam.
After watching some of his results, it became clear that although SeaFoam may be a decent interim carb cleaner, it fails miserably as a stabilizer/protector, so I decided to end our relationship and move on to something else.
This same video showed the wonderful results of STABIL as a fuel stabilizer and protector of internal parts, so I bought a small bottle of it today and put it to use. As for carb/fuel system I will probably be leaning towards one of the many products that have PEA as an ingredient, since it is proven to be more effective than just plain solvents.
After Christmas, I discovered that ProCycle has an extended fuel-mixture screw for this model now, so of course I ordered one! Going to be picking it up on Monday and hopefully installing it soon.

Cheryl Tiegs has also been winterized, although since I pulled the battery...I wasn't able to give it a decent STABIL treatment.
Maybe I'll give her a good dose of PEA in the Spring. Until then, the NEW battery gets topped up every 3 weeks or so, just to keep it healthy.

Thursday, October 23, 2025

Premature jubilation...

 Just when I thought I had exorcised all the demons, a new issue rears its ugly head.
Once I'd gotten the carb reinstalled and fine-tuned to perfection, I called it a day and thought there would be nothing but better days ahead. Then, a couple of days later, I went back outside to where she is parked and noticed a puddle beneath.
Off she came again, to verify the float and fuel levels...both spot on!
Then, I was able to give the drain screw another few degrees of closure, so I thought that was the issue. I left a bowl and hose setup overnight to capture any more wayward drops and sure enough...dry as the proverbial popcorn-fart the next morning. 
Guess I got it!

Three days later, I changed the oil and did some more wrenching and then put her away whilst I worked on Cheryl Tiegs.
After about an hour of tinkering, I look over to the TW and noticed another small puddle forming underneath again...WTF!?
This time, I noticed that I had left the fuel petcock ON...and the only way a carb will overflow when the fuel is left ON...is because the float valve/needle seat is leaking.

Ordered an OEM part from the local Yamaha shop (5LB-14390-00-00)
Now patiently waiting for it to show up. In the meantime, the fuel valve is OFF!

 

 

Saturday, October 11, 2025

Success at last!

 I've been trying to fix this "cold-start, warm-start" issue for quite a while now...like since I bought this one...and I want to share my path to success:

First of all, a summary:
- With either of my previous models, I could cold-start them then walk away to get my gear, etc while they fast-idled until "warm". Then I could push in the choke and they would idle at factory-spec, at which point I could ride away. Not this one...cold starts were awful; with full choke she would sputter and cough and run like crap...I would literally have to babysit for the first few minutes, until she warmed up enough to idle on her own without choke.
- On warm-starts with the previous models, all I had to do was touch the starter button for a split-second and they would restart instantly...this one took a bit more effort, although they weren't as bad as the cold-starts.
- I lost track of how many times I changed out the pilot jet...from a #31 to a #34 trying to find a happy medium...I even changed out the main jet to a #128, hoping this would solve the problem...it didn't.

So...I concluded that this carb needed a good ultra-sonic cleaning, so I dismantled it completely and placed it in the U/S with a Dawn dishsoap solution.
It was incredible how much dirt and crap was removed by this process, but when I went to dump the solution afterwards, I noticed a small black disc in the waste water. Unable to grab it, it disappeared down the drain. At first, I thought it was some plug for an unused port of the OUTSIDE of the float bowl. I reassembled the carb and reinstalled it and the first "cold-start" I tried was the worst ever; lots of backfiring and rough idle...once warmed, it eventually calmed down and even rode decently, so I didn't give it much thought.
On the next cold-start a few days later, it was backfiring and running rough again and I concluded that this wasn't normal, so I removed the carb one more time and dismantled it. 
This is when I discovered where that "small black disc" came from...

  


Apparently, this "plug" (OEM# 50M-14355-01-00) is vital for proper operation of the CHOKE CIRCUIT...

A quick phone call to the closest Yamaha dealer located a new plug. But before reassembling, I gave the entire carb another U/S cleaning in a solution of water and PineSol (90/10)...rotating the carb body every 10 minutes to ensure that every passage and port in there would get flooded with solution and zapped with the ultrasonic waves.
Once complete, I reassembled all the bits and pieces and reinstalled the carb onto the bike. 
I should also note that I reverted back to STOCK jetting; #31 Pilot jet and #126 Main jet. I wanted to get a base-line that I could refer back to if I ever decided to mess with the jetting again at a later date.

I had to make some minor adjustments for idle speed and mixture on the first start, and once warmed fully, I set the mixture between 1¾ and 2 turns open. This gave the best throttle response as well a the best hot-idle speed. Then I tried a warm-start...she re-started with barely a "blip" of the starter button...

THIS IS WHERE I WANT TO BE!!!!

The final test would be a cold-start the following day...which worked PERFECTLY. I pulled the choke all the way out and cranked the starter, she jumped to life and fast-idled. After about 30 seconds, I pushed the choke in to the ½ way notch and the idle speed dropped slightly.
After a minute or two of fast-idling, I closed the choke off completely and the idle dropped down to factory spec and she sat there purring like a kitten.
I left her to idle for about 5 minutes while checking out other things, then shut her off. The following warm-start was perfect as well...just a brief touch of the starter button brought her back to life and purring anew. EXCELLENT!

So, for all of those frustrated TW owners out there with (stock) carb issues, my suggestions are:

a) Go back to stock jetting and settings and see if the problem(s) disappear.

b) Get yourself an ultrasonic cleaner.

c) When using the Ultrasonic cleaner...REMOVE the plug so that you can access the choke/idle circuit associated with this plug, then... 

d)...even if it appears in good condition, replace the "plug". It's odd that it isn't included in any rebuild kits, when it is so vital to proper choke-circuit operation. 

I was so pleased with the success I achieved with the TW carb, that I took the newly rebuilt carb from my wife's CT90, and gave it the U/S treatment as well. It released an incredible amount of "gunk" and once reassembled and reinstalled, the bike idles better than ever.
 

 

Friday, October 3, 2025

Where has the time gone?

 
Shame on me for leaving this for so long...

It's not as if there's been nothing to report, I just haven't found the time to write it all down, so I'll make a bulleted-list of what's happened:

- The first official ride of the season (BOTH of us present) came at the end of March where we re-visited the Ladner Creek area of the Coquihalla. 

- I also did a couple of solo runs to the West side of Harrison lake in an effort to determine my fuel range. As it turns out, I can go over 150 kms before switching to the RES position. In fact, I never really found out what the number was...but it's over 150.

- In mid-April we did a daytrip to Boss/Davis/Shea lakes in the Kane Valley area, as well as a trek to the south end of Chilliwack Lake.

-  On May 4th, we did a Tom Waits/Cheryl Tiegs trip to the Kane Valley again. 

- June saw us travel to Barkerville and the Eastern Kootenays. While in Fairmont, I started having some issue with the TW, but attributed this to the altitude. While in Christina Lake, we were able to complete another large section of the C&W rail trail. Then, while staying in Penticton, we visited the newly re-opened Adra Tunnel along the KVR.

-  At the end of August, we traveled along the Tulameen FSR to the washout. The bridge at this location has been completely washed away. This is no longer a viable route to reach Tulameen...thankfully there are still a couple of options.

- In early September, we camped in Osoyoos for a couple of nights. Haven't been here in years, but it would serve as a basecamp for our trip to Midway, where we went overland to Grand Forks, then picked up the C&W trail from there, back to Midway. The first half of this counter-clockwise trip was nice and scenic, but the second half was unimpressive; lots of gates, fields, and even a section of pipeline road.

 A far as the TW goes...it has been running as faithfully as ever BUT...I've been having issues with the "cold starts". 
I've had the carb off and on so many times I could probably do it blindfolded now...but nothing I've done has addressed the problem:

If I adjust fuel mixture as per standard practices, the cold-starts are awful. Once warmed up she runs fine.
If I adjust the mixture for better cold starts, she runs fine once warmed up.
I've swapped the pilot jet 3 times now and then stock #31 is back in there for good. I recall buying a ProCycle jet kit for my 2008 and it didn't seem to make much difference power-wise, but left me with an off-idle stumble that I couldn't get rid of so I went BACK to factory jetting and left it that way until the day I sold it.

I'm looking to get to that point with this one...where cold-starts aren't troublesome and she runs well once fully warmed.

A week ago, I took a trip to the Henning Warming Hut and my "Man-racks" rear rack snapped in half on the way down. I've since built another one, using the plans of the one I had on the '08.

This brings us up to date.
I'll try to be a bit more fastidious when it comes to updates.

 

 

 

 

 

 

 

 

Thursday, March 20, 2025

Ready for riding

 Spent the better part of this morning/afternoon installing new front and rear sprockets...new X-ring chain...new HiFlo oil filter...and of course, new oil.

Also needed to cut off the stock skid-plate bracket, as it was creating issues with the Tusk skid-plate. Don't think I'll ever be needing the stock skid-plate again, so that shouldn't be an issue. Re-fitted the skid plate with some Allen-head button screws, so that removing it won't be such an issue...won't need a special Torx bit anymore!

I went with the 14/47 sprocket combination again, as this proved to be the best setup on the '09.

Now...all I need is some insurance and some decent weather!

 

Sunday, February 23, 2025

....onwards

 January 23, 2025...I watched my CRF drive away.

Sold it to a pleasant young local fellow who insists that it will be his "forever" bike...I wish him well and better luck than I had.
It's never easy selling a bike...especially one that I also thought would be my forever-bike...this one was nothing like the Sherpa or the "Funduro", I actually enjoyed the ride and the capabilities of this one.
It's just the maintenance that I wasn't looking forward to.

Now, my attention turns back to my original crush...my light-weight, easy to maintain, more smiles-per-gallon than any other bike I've owned so far.
Now that this sale is final, I've ordered the necessary bits to bring this one up to the task.
New sprockets, new chain, new air-filter, new oil filter, and most important; a new rear spring.
Work on the rear rack is progressing...I'm still on the fence as to how I feel about this "Man-racks"; it looks as though the alignment is critical, or you can't get the seat-bolts back into their respective holes! This may end up being a deal breaker for me, whereon I'd be back to fabricating a home-made alternative.
We'll see how things work out.

 

Tuesday, February 18, 2025

TW and personal update

 After trying to tweak the TW into perfect running shape and failing....I decided to order some new jets. The #31 pilot jet seems ridiculously small for this one, yet in my '09 it was perfect. But in this one, I have very little fuel mixture adjustment...if I close it to less than 2 turns, it runs rough, yet I can unscrew it to over 4 turns with no effect.
The #34 jet seems to be the right one...less than 1 turn runs rough, more that 2 starts to stumble...I currently have it set to about 1¾ turns out.

It took a few weeks for the parts to arrive, but that was OK because we were in Cancun for 10 days at the end of January.
Unfortunately, while I was trying to tune my bike, as mentioned above...I had injured my back which turned out to be quite severe. There were 2 separate incidents where I was within minutes of calling an ambulance, the pain was so intense. We came so close to cancelling our trip because of this injury, but I was bound and determined to give my wife the holiday she so desperately needed.
With the help of some prescription-strength muscle relaxants, handfuls of Tylenol and a back-brace, we were able to make our flight. I spent the majority of those sunny morning zoned out in a lounger by the pool, but was coherent by lunch time.
It's been over a month now and things have improved, albeit slightly...physio and stretches keep the pain at manageable levels.

I also started working on the rear rack for this one. It came with a "Man Racks" type and I am uncertain how I feel about it. Trying to mount the deck with plain old hand tools leaves much to be desired, but once the deck is mounted, it shouldn't need to come off.
The Man Racks uses the seat mounts as a securing point, which is good...but this means that I won't be able to use my magnetic seat mounting trick like on the '09. 

This remains a work in progress. I still have not sold the Rally, despite listing it on 3 separate occasions, changing the price and the ads garnering over 1000 hits.
Guess people aren't ready to buy just yet...maybe once the fair weather returns.





Wednesday, January 8, 2025

Yet another update on the CT90

Sometimes the drab, grey days of a Lower Mainland winter are useful...I have the opportunity to update this!

Back in the early Fall of 2024, I had thought of doing another day-trip or two where we could BOTH be riding. So with that in mind, I pulled the old CT90 out of it's corner and went to give it a thorough check-up.
I soon discovered that she didn't start as easily as she used to and when I got her started, she didn't run well at all. After fiddling with it for a while, I decided to re-install the WinCycles carb that I had ordered. This particular carb would leak if I over-tighten the bowl screws, so I had put it away and opted for one of the Chinesium carbs that I purchased from Amazon.
Now, it was the Chinesium carb that was the problem, so I thought I'd give the WinCycle carb another chance.
It was while adjusting the float level, that I noticed the bowl gasket was too large and would encroach into the float's space...this is why the float would stick OPEN when I tightened the screws!
Trimmed away the excess with an Olfa knife and sure enough...that worked...no more leakage.
Unfortunately, the CT still wouldn't run properly, even with the WinCycle carb, so I started looking around for a USED Keihin.
As you can guess, used CT90 carbs are as rare as hen's teeth...but I managed to locate one about 30 miles away...and the guy was willing to give it to me for FREE...can't beat a deal like that!
So once I picked it up, I set about to cleaning it well...lots of compressed air and tiny brushes into every cavity, passage and orifice. Ordered a rebuild kit and re-assembled the carb and installed. Took a few minutes to get things right before she would start, but I finally got her going and adjusted.
The requisite road-test revealed that she couldn't even make 40 mph, so I imagine there will be some more adjustment required...probably dropping the needle clip to get a bit more fuel into her might help. So, this is still a work-in-progress, but it's great to have an OE carb back on this model again.
Wonder when was the last time she had one?


Friday, January 3, 2025

Thursday, January 2, 2025

What I didn't like about the CRF300L Rally

It's not until you've replaced an old habit with a new one, that you get a bit more critical about the last one.
This goes for partners, jobs, addresses, and especially vehicles.
Now that my days with the Rally are close to being in the rear-view...I can righteously state my opinions about this model and what I liked/disliked about it.

Pros:
There were many...
- The mileage was excellent. To be able to do a 7 hr day in the saddle, on ONE stock tank of fuel is phenomenal.
- The ride was decent, although it required a modification to the rear shock.
- Throttle response was snappy and I was never "looking" for more power.
- The overall curb-appeal was there, many people commented on its looks.
- The lighting package was awesome.
- The fairing kept me dry during the frequent rains we have here.

Cons:
There were a few too...
- THE RATTLE!!! That notorious 5K rattle...absolutely hate that noise. It literally sounds like your engine is about to fly apart. The worst part is that 5000 RPM is a great cruising speed.
- Seat...one of the most uncomfortable I've sat in, and I used to own a DR650.
- Fairing...although it kept me dry, any sort of maintenance is a brutal exercise as several panels need to be removed to accomplish the simplest of tasks.
- Trailside maintenance...forget it. You can't even access the spark plug without dedicating a couple of hours for panel, tank and rad removal...
- Fuel Injection. I know most new riders are fond of this, I'm not. On most other bikes, I can pull the carb at trail-side and remove a piece of crud stuck in a jet. Good luck servicing a dysfunctional throttle body.
- Maintenance. Although the service intervals on this model are huge, the actual work to perform is (as mentioned before) brutal. In order to CHECK the valves you need to remove most of the fairing, the fuel tank, the rad fan and possibly even the rad (means draining/replacing coolant)...then you should have enough room to service the valves.
- Speaking of valves...shims on buckets...Ugh!
- Rear shock: As mentioned, it needed to be 'improved' to accommodate 2-up riding, but even in its stock form the rear shock is stupidly under-sprung.
- Weight: After having to pick it up from a downhill position TWICE in the past 6 months...I realized that I'm not as strong as I thought I was.
- Throttle: Notoriously twitchy at off-idle, means you'll be using the clutch a LOT in low-speed conditions. There is no hesitation AT ALL...the only fix for this, is an upgraded ECU for another $200 Cdn.
- Height: This model is quite tall, so if you expect to flat-foot, you're going to need to lower it somehow. Yet even when lowered, it still has a high center-of-gravity.
- Chain: The stock chain will remind you that it needs service. This one would start making noise as soon as it needed lubing or tensioning. This could be seen as a plus, but I don't like to hear ANY kind of odd noises coming from my bike.
- Chain adjustment: For some reason, this seems to be a critical issue and the method of measuring is un-necessarily complicated. Lifting the chain mid-span and measuring with a tape is good enough on most other models.
- Parts: I kept reading about the vast and extensive "after-market parts-availability" but this was only true in the US.
- Passenger footpegs: Set too high up and too far forward for an adult; had to manufacture special brackets to move them down and back.

I'm sure there are a few of each that I've missed, but this gives you a general idea.









Monday, December 9, 2024

December????

 

Once again, it has been WAY TOO LONG since I posted here...but here I am once again.
There hasn’t been much of note since September...a couple of rides that have helped me "reach a conclusion”...more on that, in a little while.

In October, we took a short day-trip to Davis Lake and stopped in at Brookmere on the way out. We tried visiting the remains of the KVR in that area, but stopped at the bollards that prevent you from going further.
I also did a short trip up to Ruby Creek in October and to Norrish Creek area a few weeks ago.
It was while I was at Norrish Creek that I came to a conclusion...

Travelling up Dewdney Peak, I was looking to get within walking distance of the Ben VonHardenburg memorial cabin. I plotted the route in Gaia and made my way past the open gates and logging equipment. Shortly, the road turned from NEW logging road to OLD logging road. As I travelled, the road became less and less hospitable; water crossings and deep washouts (or maybe they were crafted water bars)...
It was at the 3rd washout where trouble began...as I was heading up the backside of the washout, I accidentally stalled the Rally, and when my left foot could not find solid ground, it all toppled over.
Luckily I was tossed clear, but landed butt-first on a large log. The Rally lay on its side, facing backwards and downhill. It took me several attempts to get her righted again...the last one required every ounce of strength I had, but I finally succeeded. Within a few minutes, I was back in the saddle but called it a day when I saw at least 4 more of these “washouts” in the road ahead. I knew my @ss was going to be sore tomorrow, and from the effort it took to get her back upright, I was certain that my back would be hurting as well.
It was on the ride back down the hill, that I came to the “conclusion”...this bike is too big for me.
This was the second time that I experienced a standing-still tip-over, and BOTH times it was a real chore to get back into the saddle....both times, I was (relatively) uninjured...what if I had broken my arm, or a rib and couldn’t exert...how would I get home?
The ABS version of the Rally weighs 335 lbs. when laying down flat...when it’s facing downhill and backwards...well, you could easily be looking at 350 – 400 lbs depending on how you have it loaded.
So with this in mind, I have decided to get rid of the CRF and go BACK to the one that brought me to the dance in the first place.
The CRF purchase was done in a rage, after I had spent most of the summer trying to make a silk purse from a sow’s ear (F650 Funduro)...and I was ‘aware’ of what ownership of a CRF entailed. But as a hand-on type of owner, I was always wary of the impending maintenance that I would face.
The CRF needed a rear-shock renovation from the start...so that was an additional $300 added to the price.
Next was a lowering link to prevent what had just happened...another $ 200+
The availability of parts is also an issue...sure, there’s lots of “after-market" stuff, but regular consumables like air-filters and sprockets aren’t available from my usual sources.

Checking the spark plug on the trail is next-to impossible.
Checking the valves is a four hour ordeal that also involves much plastic removal as well as draining and replacing the coolant.
Heaven forbid if anything goes wrong with the fuel pump or throttle body when on the trail...granted these things are engineered to last a long time, but the failure rate is never 0%.
...and there’s that annoying rattle at 5000 RPM, which also happens to be cruising speed.
When I bought it...I didn’t realize it had a catalytic converter built into the exhaust pipe...an exhaust that incidentally gets too hot by my right leg!
All the way down the mountain, I created a list of things that I didn’t like about this bike and when I got back down to roadside I realized that I didn’t “love” this bike as much as I thought I did, or ever would...and that’s never a nice conclusion to draw.
When I first started riding, back in 2004 I went from a 1974 Honda CT90 to a Yamaha TW200.
After a few years of the TW, I was convinced that I needed more power...so I sold that gem and bought an XT225...then an XT250...a DR650...A “Super Sherpa” (still hate that name) and eventually, I came back to the TW.
Fast forward another couple of years, and I convinced myself (again) that I was ready for the ADV scene and needed a larger bike again. Cue the BMW “Funduro” that turned out to be more trouble than it was worth and once that one was gone, I purchased the CRF under the impression that it would be “the last bike I’d ever need”.
Now, I find myself yearning for the comforts of home...and the familiar territory that is the TW200.
At 280 lbs, she’s easy enough to pick up, even when lying across my leg!

Tappet valve-adjustments are something that I can do in under an hour.
A carb is something that I can remove and repair at trail-side.
Parts availability from my usual sources...close to 85 MPG...as reliable as a hammer!


Only now do I realize that my beloved TW is in fact, the last bike I’ll ever want.

Sunday, September 15, 2024

Mission accomplished...KVR completed!

 Well, it's been several years in the making, but we FINALLY completed to entire KVR rail trail, in September of 2024!

This involved one loooooong day in the saddle, but I can finally say that I have completed it.

Read about it HERE.

 

Friday, July 26, 2024

Center Creek ride July 26

 It's been 3 years since I last visited this area...time to go back!

Read about it HERE.


Monday, July 1, 2024

Two crappy rides in 2 days....

 It's not often that I end a ride by going: "Well...that's one I'll never do again!" but this happened TWICE to me this past weekend.

Read about it HERE.

Newest addition to the stable...

 Lo and behold...my 2015 Suzuki Vstrom: Purchased Aug 13, 2026. This will be my final attempt to enter the "ADV" scene (remember t...